SICASS KEY SWITCH ELIMINATOR DONGLE – Taco Moto Co.

Quickly remove and eliminate the OEM key switch. Simple plug in installation, the fuel pump kicks on and pressurizes the system with a tap of the start button. The key eliminator is NOT the same as leaving the key on, it actually bypasses and eliminates the key switch (you have to unplug the key switch from the wiring

Quickly remove and eliminate the OEM key switch. Simple plug in installation, the fuel pump kicks on and pressurizes the system with a tap of the start button.

The key eliminator is NOT the same as leaving the key on, it actually bypasses and eliminates the key switch (you have to unplug the key switch from the wiring harness for the dongle to work properly).

The dongle reroutes how the power is delivered to the fuel pump. On 2017-19 EXC's the fuel pump power is routed through the stock key switch, key on = fuel pump powered up.

This is why you kill the battery when you leave the key on. With the dongle installed the power to the fuel pump is re-routed through a power relay already on the bike that’s activated when you tap the start button and energized while the motor is running. When the engine shuts off power is removed and the bike ‘goes to sleep’. No more dead batteries. 

 

FITMENT:

26-231

• 2007-11 KTM EXC

26-233

• 2012-16 KTM EXC/EXC-F
• 2014-16 HQV FE-S

*DOES NOT FIT:

• 2017 KTM EXC/EXC-F
• 2017 HQV FE

26-234

• 2017-2024 KTM EXC, EXC-F, FE, FEs
• 2019 model year only - KTM EXC/EXC-F *ONLY WORKS WITH INSTALL OF 26-056
• 2019 model year only - HQV FE *ONLY WORKS WITH INSTALL OF 26-056
  

 

 

Quickly remove and eliminate the OEM key switch. Simple plug in installation, the fuel pump kicks on and pressurizes the system with a tap of the start button. The key eliminator is NOT the same as leaving the key on, it actually bypasses and eliminates the key switch (you have to unplug the key switch from the wiring harness for the dongle to work properly). The dongle reroutes how the power is delivered to the fuel pump. On 2017-19 EXC's the fuel pump power is routed through the stock key switch, key on = fuel pump powered up. This is why you kill the battery when you leave the key on. With the dongle installed the power to the fuel pump is re-routed through a power relay already on the bike that’s activated when you tap the start button and energized while the motor is running. When the engine shuts off power is removed and the bike ‘goes to sleep’. No more dead batteries.    FITMENT: 26-231 2007-11 KTM EXC 26-233 2012-16 KTM EXC/EXC-F 2014-16 HQV FE-S *DOES NOT FIT: 2017 KTM EXC/EXC-F 2017 HQV FE 26-234 2017-2024 KTM EXC, EXC-F, FE, FEs 2019 model year only - KTM EXC/EXC-F *ONLY WORKS WITH INSTALL OF 26-056 2019 model year only - HQV FE *ONLY WORKS WITH INSTALL OF 26-056    

GOOFIT 4 Wires Ignition Switch Key Set with Cap for

Sicass Racing headlight/turn signal and start/kill switch

Everything but FMF – Page 2 – Taco Moto Co.

Over Under Start/Kill Switch - rewired to plug into your late

Taco Moto – Taco Moto Co.

KTM 500 EXC-F FE key switch delete instructions & removal - Sicass

Taco Moto – Taco Moto Co.

Taco Moto – Taco Moto Co.

Home Page – Taco Moto Co.

Keyed kill switch for KTM, Husaberg, and Husqvarna off road motorcycles. The keyed kill switch wires into your existing system in minutes with direct

SICASS KEYED KILL SWITCH | 2004-23 KTM/HUSKY/HUSABERG

Electrical + Lighting – Page 2 – Taco Moto Co.

Bars + Controls – Tagged electrical– Taco Moto Co.

Taco Moto – Taco Moto Co.