Facilan™ PCL 100 Filament, 3D4Makers

 Facilan™  PCL 100 (Polycaprolactone) Filament  Facilan™ PCL 100 it is perfect for high-value applications such as medical research. Our customers use our PCL for research into artificial trachea, smart materials, scaffolds for tissue engineering, bioabsorbable implants, drug-loaded implants and other cutting-edge applications.  Facilan™ PCL 100 is used by many leading universities and research centers worldwide for bleeding edge work in bioprinting and patient specific medical research.  Facilan™ PCL 100 is very flexible and tough with a glass transition temperature of -60 °C and a print temperature of around 120°C. Facilan™ PCL100 is polycaprolactone homopolymer with a molecular weight of 50000 g/mol. Facilan™ PCL100 is a semi-crystalline aliphatic biodegradable polyester with white final appearance. Filament produced by 3D4Makers is based on raw material produced in compliance with the European regulations EC No. 1935/2004 and EC No. 10/2011 concerning plastic materials and articles coming into contact with food. The material has an amazing adhesion between layers which results in great improvement
 Facilan™  PCL 100 (Polycaprolactone) Filament  Facilan™ PCL 100 it is perfect for high-value applications such as medical research. Our customers use our PCL for research into artificial trachea, smart materials, scaffolds for tissue engineering, bioabsorbable implants, drug-loaded implants and other cutting-edge applications.  Facilan™ PCL 100 is used by many leading universities and research centers worldwide for bleeding edge work in bioprinting and patient specific medical research.  Facilan™ PCL 100 is very flexible and tough with a glass transition temperature of -60 °C and a print temperature of around 120°C. Facilan™ PCL100 is polycaprolactone homopolymer with a molecular weight of 50000 g/mol. Facilan™ PCL100 is a semi-crystalline aliphatic biodegradable polyester with white final appearance. Filament produced by 3D4Makers is based on raw material produced in compliance with the European regulations EC No. 1935/2004 and EC No. 10/2011 concerning plastic materials and articles coming into contact with food. The material has an amazing adhesion between layers which results in great improvement of the impact resistance, strength, durability, and printability. Due to the low melting point, of Facilan™ PCL100 it can be reshaped after 3D printing in water with a temperature of 55 °C. Recommended restrictionsDo not use in medical applications involving permanent implantation in the human body. 3D4Makers Polycaprolactone Facilan™ PCL 100 is one of the most extensively used bioprinting and medical 3D printing research materials worldwide.  Facilan™ PCL100 Material Properties  Density: 1.1 g/cm³ Tensile Strength: 45 MPa Elongation at Yield: 15 % Tensile Modulus: 350 MPa IZOD Impact Strength (notched): 8 kJ/m2 Shore D Hardness: 46 Heat Deflection Temperature (0,45 MPa): 57 °C Molecular Weight (mean): 50,000 daltonsin Print Settings  Print Temperature: 130°C (130 to 170°C) Bed Temperature: 30-45°C Adhesion: Ultimaker Adhesion sheets, Avery Mailing labels L7567-25, PEI Sheets Print Speed: 10mm/s  (10 - 30 mm/s)  Mass flow: 120% Fan Speed: 100% Note: Add M302 S120 into the beginning of the g-code to allow cold extrusion, below 170°C Extra: Minimum Layer Time considerably +/- 60 sec minimum, highly dependent of model size and complexity and enabled Lift Head. Support: If PVA or breakaway Support = enabled; Support overhang angle = 0°; Enable Prime Tower = Enabled. Support with Facilan Ortho onto itself: not recommended TDS You can download the Technical Data Sheet for Facilan™ PCL 100 here. MSDS You can download the Material Safety Data Sheets for Facilan™ PCL100 here:  English Spanish French Italian  German  Dutch   *The previous name of this product was PCL100    

Fused filament fabrication of polycaprolactone bioscaffolds: Influence of fabrication parameters and thermal environment on geometric fidelity and mechanical properties - ScienceDirect

3D4Makers.com

Facilan PCL 100

Magigoo PA / Nylon, glue stick

Fused filament fabrication of polycaprolactone bioscaffolds: Influence of fabrication parameters and thermal environment on geometric fidelity and mechanical properties - ScienceDirect

Medical and antibacterial filaments you should consider using, while 3D printing anti-COVID-19 designs - 3DPC

High Quality Filaments PEEK, PEKK, PEI, PPSU, PCL, PETG, ABS, PLA, C8

Facilan™ PCL 100 Polycaprolactone Material Extrusion Additive Manufacturing Filament Facilan™ PCL 100 Polycaprolactone Facilan™ PCL 100 it is perfect

3D4Makers FACILAN PCL 100 3d printer filament

3D4Makers High Performance 3D Printing Filament The Story So Far

PI Z2 Filament

News – Tagged 3D Printing

Facilan PCL 100