Veracity Highwire Ethernet over Coax Converter with PoE

The Veracity Highwire Ethernet over Coax Converter with PoE converts existing video infrastructure into a fast network connection. For IP cameras and mega-pixel cameras, it turns the legacy 12V or 24V power into a universal Power over Ethernet (PoE) suppl
BSC provides IP-Based wireless and wired networking services, solutions and products for Data, Video and Voice applications. With more than 20 years..
The Veracity Highwire Ethernet over Coax Converter with PoE converts existing video infrastructure into a fast network connection. For IP cameras and mega-pixel cameras, it turns the legacy 12V or 24V power into a universal Power over Ethernet (PoE) supply. Using the converter, you can utilize old analog cabling without installing extra power for the new cameras.Speed, duplex, and crossover are sensed on connection of the Highwire Ethernet over Coax Converter with PoE, thus requiring no setup. No configuration is required when you connect the IP camera and a regular Highwire at the other end of the cable, as the link will be established automatically. Using universal IEEE 802.3af standard, the Highwire PoE can not only detect power but also enable it for IP cameras, with up to 6.5W for Power Class 1 or 2 devices.The connection of the Ethernet over Coax Converter with PoE is invisible to Ethernet data, and does not need a MAC or IP address. Besides auto-optimizing for all 75 ohm coaxial cables, the long connection range of the converter makes it suitable for network connections beyond 328' (100m).Featuring a universal power input, the Highwire Ethernet over Coax Converter is ideal for low-voltage installations and can also be used on legacy coaxial cables. Compared to Cat5 cables, the coaxial cables coil and bend appropriately, making the converter apt for allowing network access to elevator carriages, VoIP, security, lift panel, and other devices.Converts existing video infrastructure into a fast network connectionFor IP cameras and mega-pixel camerasTurns legacy 12V or 24V power into universal Power over Ethernet (PoE) supplyAllows to replace old analog cabling without installing extra power for the new camerasSpeed, duplex, and crossover are sensed on connectionAutomatically detects and enables power to IP cameras using the universal IEEE 802.3afUp to 6.5W for Power Class 1 or 2 devicesNo need for MAC or IP addressInvisible to Ethernet dataAuto-optimizing for all 75 ohm coaxial cablesLong connection range of up to 1650' (500m) of RG-11 cable, or 930' (280m) of CCTV-grade RG-59 cableSuitable for network connections beyond 328' (100m)Universal power inputIdeal for low-voltage installations; can be used on legacy coaxial cablesCoaxial cables coil and bend appropriately compared to Cat5 cables - converter apt for allowing network access to elevator carriages, VoIP, security, lift panel and other devicesNo modification needed when used with 50 ohm coax or cables of other impedanceOptional wall-mounting brackets and a rack-mounting kit

Veracity USA Highwire PoE VHW-HWPO - Media Converter - 100Mb LAN - 10B

Veracity Long Range PoE Over Coax Highwire Longstar, Radiant, Delhi, India

HIGHWIRE Range

Veracity Highwire PowerStar Base 4 LINKLOCK

IP over RG59? Ubiquiti Community

Veracity VLS-1P-BC HIGHWIRE Longstar Long Range Ethernet with PoE

HIGHWIRE turns any analog video cable into a high-speed network connection. This allows the replacement of analog IP cameras with IP cameras without installation of any new cabling, which can save some 30-40% of the system cost. Universal connections for coax, network and power, with no user set-up required, make installation easy and fast.

Veracity Highwire Ethernet Over Coax Device

Veracity HIGHWIRE QUAD Ethernet over Coax Converter VHW-HWQ B&H

VHW-HWPS-C Veracity Highwire Powerstar Ethernet & PoE Over Coax Camera Unit

VHW-HWPS-C4 - VERACITY - Ethernet Over Coax

VHWHWPO - Veracity