Knife Sharpening Guide Clip – SharpEdge

The Sharpening Guide Clip (or Angle) helps to maintain the same sharpening angle while sharpening your knife, as seen on the product pictures. The purpose of the soft plastic on the inner side of the clip is to prevent the blade from getting damaged, while a special ceramic cover enables smooth sliding on the whetstone without damaging it.
The Sharpening Guide Clip (or Angle) helps to maintain the same sharpening angle while sharpening your knife, as seen on the product pictures (with the ZDP-189 Santoku Black knife). The purpose of the soft plastic on the inner side of the clip is to prevent the blade from getting damaged, while a special ceramic cover enables smooth sliding on the whetstone without damaging it.This guide clip is suitable for blades of 3.5-5cm (1.4"-2.0") of width. For such blades, a clip will hold an edge of approximately 16°, an angle at which Japanese knives should be sharpened.Guide clip can also be used on non-Japanese knives, but the edge will be a bit more sensitive since knives from softer steels (like German/French knives, <60 HRC) should be sharpened at a slightly wider angle (around 20°).

The Sharpening Guide Clip (or Angle) helps to maintain the same sharpening angle while sharpening your knife, as seen on the product pictures (with the ZDP-189 Santoku Black knife). The purpose of the soft plastic on the inner side of the clip is to prevent the blade from getting damaged, while a special ceramic cover enables smooth sliding on the whetstone without damaging it.

This guide clip is suitable for blades of 3.5-5cm (1.4-2.0) of width. For such blades, a clip will hold an edge of approximately 16°, an angle at which Japanese knives should be sharpened.

Guide clip can also be used on non-Japanese knives, but the edge will be a bit more sensitive since knives from softer steels (like German/French knives, <60 HRC) should be sharpened at a slightly wider angle (around 20°).

The Sharpening Guide Clip (or Angle) helps to maintain the same sharpening angle while sharpening your knife, as seen on the product pictures (with the ZDP-189 Santoku Black knife). The purpose of the soft plastic on the inner side of the clip is to prevent the blade from getting damaged, while a special ceramic cover enables smooth sliding on the whetstone without damaging it. This guide clip is suitable for blades of 3.5-5cm (1.4-2.0) of width. For such blades, a clip will hold an edge of approximately 16°, an angle at which Japanese knives should be sharpened. Guide clip can also be used on non-Japanese knives, but the edge will be a bit more sensitive since knives from softer steels (like German/French knives, <60 HRC) should be sharpened at a slightly wider angle (around 20°).

WorkSharp WSKTS Knife and Tool Sharpener - Ken Onion Edition

Optimal angle to ensure a very fine, sharp edge Makes sharpening with a whetstone easy Clips onto spine of knife Plastic base with ceramic rod

Naniwa QX-0010 Blade Angle Guide for Sharpening Stone

Precision Adjust™ Knife Sharpener - Work Sharp Sharpeners

5 Angle-Guide Knife Sharpeners That Make The Cut

Smith's Slide Sharp Edge Grip 4-Slot Turquoise

Made in Japan., Naniwa Japanese Knife Sharpening Guide:, Most knife sharpeners find maintaining a consistent angle to be the hardest part of putting a

Naniwa A-901 Kitchen Knife Sharpening Guide Clip

How to Use a Whetstone and Honing Steel to Keep Your Knives Supersharp

DESCRIPTIONHigh quality knives should always be sharpened on stones, and if sharpened correctly you should have a consistent bevel along the length of

KNIFE SHARPENING GUIDE

Knife Sharpening Guides Next Day Delivery – Rutlands Limited