Makita Guide Rail Square Adapter - DIY Kit – Tool Theory

Par un écrivain mystérieux

Last updated 28 mai 2024

Makita Guide Rail Square Adapter - DIY Kit – Tool Theory

Square cuts for the Makita guide rail. The most affordable, best-selling guide rail square solution on the market. Sets up the guide rail for accurate 90 degree and 45 degree cuts. Ultimate flexibility to save time in the shop.
Rafter Square not included! To use this kit you will need to purchase a 12" Empire Rafter Square (Model #3990 or Model #E3992)Makita Guide Rail Square KitFeature OverviewWe worked with engineer Jeff Wagner to bring his rail square idea to market. The goal of this rail square adapter was to be an affordable option that will still produce accurate 90/45 degree alignment.This is designed to work with Makita Guide Rails.Our guide rail square uses the accuracy of the 90/45 degree sides on the aluminum rafter squares to achieve a true 90 and 45 degree angle. We are able to keep the costs down by using a 3D printed cam lock mechanism to secure the square against the rail. There are a total of 4 cam locks, 2 on each side so that you can use the square on either side of the guide rail.The guide rail square creates accurate 90 and 45 degree alignmentThe guide rail square can be used on either end of the guide railStrong cam locking system to ensure snug fit to railOptional Support Tab to keep the rail square flush to your workpieceAccurate AlignmentOur guide rail square adapter uses the accuracy of an Empire square and the guide rail to achieve accurate 90 degree and 45 degree alignment. The kit installs onto an Empire square within a few minutes. It uses a cam lock system to press the Empire square to the guide rail t-track, achieving a true 90 degree.90° and 45° AlignmentThe guide rail square adapter can be flipped around and used on both sides. This means that you can set up a 90 degree cut or 45 degree on the close side of your workpiece. You can also install the guide rail square on the far side of the guide rail on the opposite side of the work piece.Optional Support TabThe Empire square is 12" long, which means towards the end there will be minimal sagging due to the weight. This is common on all guide rail squares. We provide an optional support tab which will let the guide rail square and guide rail sit flush onto the workpiece.Technical DetailsWeight: 6 oz (excluding rafter square)Material: HTPLA plasticCompatible Guide Rails: Makita, Festool, WEN, and Powertec (Festool/Makita Clone)Compatible Rafter Squares: Empire #3990 and Empire #E3992What's Included?(2) Installation Brackets(4) Cam Locks(2) Countersunk Screws(2) Nylon Hex Lock NutsWhat's Included: Optional Support Tab?(2) Installation Support Tab Brackets(2) Support Tabs(1) Countersunk Screws(1) Nylon Hex Lock Nuts

Kreg ACS Guide Rail Square Adapter - DIY Kit - for Track Saw Guide

The Makita 55 in. Guide Rail Connector (194638-5) is designed to join guide rails together in order to make longer cuts while maintaining the desired accuracy. The connectors install quickly with an included wrench for convenience. Crafted with long-lasting steel, these versatile connectors work with Makita guide rails as well as select competitor rails. Designed for joining guide rails to make longer, dead-on cuts Compatible with Makita 55 in.