Pi+® (PiPlus®) 1PC PC 10 Port 4 Pin Fan Hub 10-Way 4-pin IDE Fan Speed

About the product:  Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans. In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the

About the product: 

• Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.
• In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
• For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
• There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
• RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the source fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.

• Package content: 1 x 12V 10 way 4-pin ide fan governor, 1x PWM connecting cable.

Description:

• Fan interface: IDE interface, support 3/4 pin
• Product size: 7*4.6cm/2.7*in
• Rated voltage: 12V
• Product model: temperature control 4-pin hub
• Scope of application: motherboard 4-pin interface
• PWM cable length: 40cm/15.7in

Features:

• 7.PWM is connected to the motherboard FAN CPU interface through the PWM CONNECTION cable,
• 8. The red interface is the specific interface of the CPU fan, and the black interface is the standard PWM fan interface.
• 9. There is a double-sided EVA adhesive on the back, which can fix the hub in the computer case.

Note:

• 1. The red port must be plugged into a fan first. Pull one end of the PWM cable and plug it into the CPU_FAN interface on the motherboard.

RGB Fan Hub PC Case Fan Controller 4 Pin, Support 10 Computer CPU Fans Splitter (RGB)

SinLoon 4 Knob Cooling Fan Speed Controller PC 8

Motherboard 1 to 10Pin Fan 4 Pin PWM Cooler Fan HUB Splitter

1 to 4 PWM FAN HUB - Gelid Solutions

Pi+® (PiPlus®) 1PC PC 10 Port 4 Pin Fan Hub 10-Way 4-pin IDE Fan Speed

Gelid Solutions 1-to-4 PWM Fan Hub, FC-PWM-04, PC CPU

Up to 6 sets of Addressable RGB (5V 3pin) plugs and PWM (12V 4pin) plugs to meet your needs of connecting more devices. Support simultaneous startup of 6 way fans, ARGB is all synced between all fans, one setting applies to all fans (speed and color). This CPU Cooling IDE Hub is powered by IDE 4PIN, which can simultaneously supply power to the fan and 5V 3 pin ARGB products. The motherboard has no power supply burden and can maintain a stable output even at full load.

12V 4Pin PWM & 5V 3Pin ARGB with SATA 15Pin Power 2-in-1 Hub 6 Way Sync CPU Cooling Fan Addressable RGB Lighting PCB Splitter for Extended Motherboard

Pi+® (PiPlus®) 1PC PC 10 Port 4 Pin Fan Hub 10-Way 4-pin IDE Fan Speed

CONTROL 10 FANS: Allows control up to 10 fans using only 1 motherboard header. EXTERNAL PWM: When connected to 4-Pin PWM fans, it allows modification

Zalman 10-Port PWM Fan Hub Splitter for 4-Pin PWM & 3-Pin Non-PWM Fans, 12V SATA Connector Powers 10 Fans w/ 1 Motherboard Header (ZM-PWM10FH)

PWM Fan Hub PC Case Fan Controller 4 Pin, Support

1 to 10 4 Pin PWM Cooler Fan HUB Splitter Extension PC Speed

EnLabs PWMHUB10S 10 Ports 4-Pin PWM Fan Hub, SATA 15pin to 10 Fan

This is ARGB PWM 2-in-1 6 way hub. Up to 6 sets of Addressable RGB (5V 3pin) plugs and PWM (12V 4pin) plugs to meet your needs of connecting more

12V 4Pin PWM & 5V 3Pin ARGB with SATA 15Pin Power 2-in-1 Hub 6 Way Sync CPU Cooling Fan Addressable RGB Lighting PCB Splitter for Extended Motherboard

EnLabs PWMHUB10S 10 Ports 4-Pin PWM Fan Hub, SATA 15pin to 10 Fan