Braun BNT400 No Touch + Forehead Infrared Thermometer – Beyond Care

Par un écrivain mystérieux

Last updated 12 juin 2024

Braun BNT400 No Touch + Forehead Infrared Thermometer – Beyond Care

Dual technology - No touch + touch forehead measurement. No touch mode suitable for when your child is sleeping. Age Precision technology with colour-coded display Backlit display for use in the dark and silent mode to avoid waking up a sleeping child Fast 2-seconds measurement Food & Liquid mode Remove Protective
Dual technology - No touch + touch forehead measurement. No touch mode suitable for when your child is sleeping. Age Precision technology with colour-coded display Backlit display for use in the dark and silent mode to avoid waking up a sleeping child Fast 2-seconds measurement Food & Liquid mode Remove Protective Cap & Power On Remove the protective scanner cap before taking a measurement. Press and release the power button once. Back-light will come on and the start-up sequence begins. NOTE:The thermometer and individual should be in the same ambient temperature for at least 10 minutes. An individual must be indoors for 30 minutes before taking a measurement Select Age Range Select age range with Age Precision button. The device will start cycling through the age ranges, highlighting the 3 ranges you may select: 0-3 months, 3-36 months, or 36+ months. Press the Age Precision button to toggle through the rage range until you select the age appropriate for the individual. Position Position the thermometer on or up to 2.5 cm away from the center of the individual's forehead, just between the eyebrows. When the thermometer is ready and on or 2.5 cm away from the forehead, a horizontal line of dashes (--) will appear on the screen. For No touch reading, the yellow guidance light will show you where you are aiming. NOTE: If the eyebrow area is covered with hair, sweat or dirt, please clean the area beforehand to improve reading accuracy.It is important to hold the thermometer and the forehead steady during measurement. Movement will impact the temperature reading. Take Temperature Three dashed lines indicate the thermometer is ready to take a temperature. Press the temperature button. The display will show a dashed line animation while it takes a reading. Once the reading is complete a confirmation beep will be heard and the appropriate fever light color will be displayed on screen. NOTE: If the device is positioned too far away from the forehead, it will prompt you to move closer by displaying the characters 0.-2 cm. Slowly move the device toward the forehead until the dashed line animation starts and a reading is displayed.